Contact Adhesive

STRONG FIX XL-600

SYNTHETIC RUBBER ADHESIVE

STRONG FIX XL-600 , specially for PVC ooring, foam / rexine (brushable) upholstery STRONG FIX XL-600 is free from harmful benzene.

Features:

Excellent spreadability. Compared to other adhesive no residue left. Can be used to the last drop. Economical in the long run. Free from benzene-non hazardous to health.

Uses:

PVC Flooring. Foam/rubber foam to metal/wood.Upholstery or rexine to metal. A/c unit insulation. Duct insulation. Under deck insulation.

How to Apply:

The surfaces to be bonded should be clean, dry and free from oil / grease stains.
Apply STRONG FIX XL-600 on both the surfaces. Once the adhesive becomes dry press both the surfaces together, ensuring uniform contact

rubber adhesive

STRONG FIX GP-604

SYNTHETIC RUBBER ADHESIVE

STRONG FIX GP-604 with faster bonding to your expectation. (brushable) Specially for making superior quality sofa, Chair, Mattresses etc. STRONG FIX GP-604 is free from harmful benzene.

Features:

Free from benzeneNon hazardous to health. Soft on foam, keeps foam shape intact. Fast bonding. Excellent spreadability. Economical in long run.

Uses:

Foam / rubber foam to foam. Upholstery (rexine to foam / rubber foam), wood / plywood to foam / rubber foam / rexine. Metal to foam / rubber foam.

How to Apply:

The surfaces to be bonded should be clean, dry and free from oil / grease stains.
Apply STRONG-FIX FOAM PLUS on both the surfaces Once the adhesive becomes dry press both the surfaces together, ensuring uniform contact

rubber adhesive in India

STRONG FIX MP-605

SYNTHETIC RUBBER ADHESIVE

STRONG FIX MP-605 (brushable) is especially for PVC & plywood application. The multipurpose adhesive is used in automobile Industries, Bus body building, Non woven, Plastic, Sponge, High Density Foam, Thermal insulation, Timber log & Fabrics & Furniture industries

How to Apply:

Material to be bonded should be clean , dry and free of dust , oil or grease.

Using brush and apply thin coating of adhesives to both of the surfaces.

Allow the solvent content to evaporate before bonding the materials. The time for evaporation will depend on the temperature and humidity. On non absorbent or non permeable material such as leather / chipboard bonding may be possible within a matter of 2-3 minutes. Of application on absorbent or permeable materials a minimum of 15 minutes should elapse before the surface are bonded. Bond the materials under firm pressure. Dried Coating of STRONG FIX MP-605 may be reactively by wiping over the surface with suitable solvent.

rubber based adhesive

STRONG FIX XH-610

SYNTHETIC RUBBER ADHESIVE

STRONG FIX XH-610 is widely accepted for speed in furniture (brushable) making and for the surfaces where it is difficult to apply pressure. Used specially for bonding vertical laminates.

Features:

To bond the surfaces where it is difficult to apply pressure Vertical lamination Speed in furniture making.

Uses:

For bonding decorative laminates to wood and plywood. Rubber, rexine, leather, foam, fiber, metal, glass, ceramic, canvas etc. Duct insulation (nitryl rubber to metal). Under deck insulation.

How to Apply:

Laminates that are smooth or slippery on the reverse should be roughened. Apply a thin film of STRONG FIX XH-610 uniformly to both the surfaces to be bonded with the help of a brush or a spatula. (Durability of bond is likely to be affected if excess adhesive is applied. In case of highly porous surfaces, it may be necessary to apply a second coat of adhesive after allowing the first one to dry for 15 min.)

Allow the solvent to evaporate for 10-15 min., till the film is dry. Bring the surfaces together from one end. Apply sufficient pressure to obtain uniform contact.

Once positioned, do not shift the laminate, as the adhesive film should not be broken. Leave a little excess laminate so that cutting off along the sides is possible if the laminate is not placed properly.

synthetic rubber adhesive

STRONG FIX SP-604

SYNTHETIC RUBBER ADHESIVE

STRONG FIX SP-604 is Off White, high quality, high solids, sprayable Synthetic Rubber contact adhesive, featuring very high early green strength coupled with an excellent working tack life. STRONG FIX SP-604 is suitable for bonding PU Pad, Metallic Frame, Hard Board, Non Oven, and Felt. Primarily used in the Automobile industry, where extra heat resistance, uninterrupted spraying and 0the ability to be used at temperatures from 15-30 C is required. STRONG FIX SP-604 also gives excellent adhesion to a wide range of materials including many natural and synthetic rubbers, rigid and exible polyurethane foams and other similar materials.

Specially designed for easy spraying without cobwebbing, STRONG FIX SP604 is suitable for use with all current post forming equipment

Solvent Chemical manufacturer

STRONG FIX SP-605

SYNTHETIC RUBBER ADHESIVE

STRONG FIX SP-605 (sprayable) is multipurpose adhesive is specially developed for Automobile sector. The special future is very good heat resistance and bond strength.

How to Apply:

Air Pressure pilot spray gun is used for spraying purpose.
Air compressor should be free from traces of water .
Air pressure :- 3.5 to 5 kg / cm2
Nozzle orifice size:- 1.6 to 2 mm.
Ideal distance 2 to 3 feet from the substrate

rubber adhesive

STRONG FIX SP-607

SYNTHETIC RUBBER ADHESIVE

STRONG FIX SP-607 is a multipurpose adhesive is specially developed for Mattress Industries where extra green strength is required & other uses are in furniture sector, Non oven, PU Foam, Hitlon Foam & general purpose bonding

How to Apply:

Air pressure pilot spray gun used for spraying purpose.
Air compressor should be free from traces of water.
Air Pressure:- 3.5 to 5 Kg/cm2
Nozzle Orifice size:- 1.6 to 2 mm
Ideal distance 2 to 3 feet from the substrate

synthetic resin adhesive

STRONG FIX SP-609

SYNTHETIC RUBBER ADHESIVE

STRONG FIX SP-609 is a high quality, high solids, sprayable Synthetic Rubber contact adhesive, featuring very high early green strength coupled with an excellent working tack life. STRONG FIX SP-609 is suitable for bonding painted panels & fire retardant foam. Primarily used in the canopies generator manufacturing industry, where extra heat resistance, uninterrupted spraying 0and the ability to be used at temperatures from 15-30 C is required. STRONG FIX SP-609 also gives excellent adhesion to a wide range of materials including many natural and synthetic rubbers, rigid and exible polyurethane foams and other similar materials.

Specially designed for easy spraying without cobwebbing, STRONG FIX SP-609 is suitable for use with all current post forming equipment.

rubber based adhesive

STRONG FIX SP-610

SYNTHETIC RUBBER ADHESIVE

STRONG FIX SP-610 (Sprayable) :- is improved version sprayable adhesive developed specially for canopies industries ( Generator) to achieve

proper heat resistance. Polychloroprene based rubber suitable grades are selected. Special additives are added to increase the heat resistance.

How to Apply:

Sufficient quantity of STRONG FIX SP-610 adhesive should be sprayed on hardboard to wet it sufficiently so that it can easily transfer to non oven substrate while bonding . Bond both the substances together. Apply adequate pressure for proper bonding. Keep bonded sets for air curing for 24 hours. Keep 0air cured substrates at 100 C.

synthetic resin adhesive

STRONG FIX TM-600

SYNTHETIC RUBBER ADHESIVE

STRONG FIX TM-600 is specially formulated with focus on the automotive industry for vaious critical applications to increase productivity, reduce waste, save energy and improve your products performance. STRONG FIX TM-600 is a product that differ in viscosity, cure speed, temperature resistance, chemical resistance, peel strength and high tack.

How to Apply:

Sufficient quantity of STRONG FIX TM-600 adhesive can be sprayed or brush applied as per applicators convenience.

Synthetic Rubber Adhesive manufacturers